Input Trays - Xerox Phaser 6300, 6350, 8500, 8550 Administrator's Manual

Input Trays

The following table lists the PCL commands for the input trays supported by the
Phaser 6300/6350 printer. The table also lists the alternate tray used if the optional input tray is
not installed.
Note:
When more than one command is listed, you can use either command.
Input Tray
Tray 1 (MPT) in multi-sheet mode
Tray 1 (MPT) in manual feed mode
Tray 2
Tray 3
Tray 4
Tray 5
Autoselect
Current tray/page eject
* The character that follows the "&" in the command is the lowercase letter "L".
PCL 5 Command
<Esc>&l4H
<Esc>&6H
<Esc>&l2H
<Esc>&l3H
<Esc>&l1H
<Esc>&l5H
<Esc>&l8H
<Esc>&l20H
<Esc>&l21H
<Esc>&l7H
<Esc>&l0H
System Administrator Guide
B-4
Phaser 6300/6350 PCL Commands
*
Alternate Tray
n/a
n/a
Tray 2
Tray 1
Tray 1
n/a
n/a