Printing On Glossy Paper - Xerox PHASER 6140 User Manual

Printing
4. Click the Properties button.
5. In the Paper/Output tab, do the following:
a. From the Paper Size list, select the size of the sheet of labels.
b. From the Paper Type list, select Labels.
c. From the Paper Tray list, select Manual Feed Slot.
6. Click OK and then, in the Print dialog box, click OK (or Print) to start printing.

Printing on Glossy Paper

This section includes:
• Glossy Paper Printing Guidelines
• Printing on Glossy Paper from Tray 1
• Printing on Glossy Paper from the Manual Feed Slot
Glossy Paper Printing Guidelines
• You can print on glossy paper from Tray 1 and from the manual feed slot.
• You cannot perform automatic 2-sided printing using glossy paper.
• Do not open sealed packages of glossy paper until you are ready to load them into the printer.
• Leave glossy paper in the original wrapper and store unopened packages in the original shipping
carton until ready to use.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you plan to use, and remove the unused portion from the
tray when you are finished printing. Put the unused glossy paper back in the original wrapper and
seal it for later use.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to
curl and jam the printer.
Printing on Glossy Paper from Tray 1
1. Gently pull out the paper tray and slide open the paper guides, then open the output tray to hold
the printed sheets. For details, see
2. Fan the sheets to release any that are stuck together.
3. Insert the glossy paper into the tray with the side to be printed faceup.
Note: Do not load more than 25 sheets. Do not load the paper above the fill line indicated on the
tray. Overloading the tray may cause jams.
80 Phaser 6140 Color Laser Printer
User Guide
on page 80
on page 80
on page 81
Loading Paper in Tray 1 on page 55.
6140-020