Advantech LNC M5800 Series Operation Manual page 67

Milling Machine Series
CNC operations

For detailed instructions, please refer to section 1.8 for instructions on how to change Tool Length Offset Settings
2. Tool wear offset

Press the 【Wear】 key to enter tool wear offset page.

There are a total of 99 sets of settings available for tool wear offset, and <PgUp> and <PgDn> keys can be used to
switch the settings screen.

Use arrow keys to move the cursor to X-wear, Y-wear, Z-wear, and wear radius for the tool number you wish to
set up, enter a set value into the input area and press the <Input> key to enter the numerical value into the
controller. (This is an incremental setting)
62
Advantech-LNC Technology Co., Ltd.