Advantech LNC M5800 Series Operation Manual page 166


Arrow keys on the MDI panel should be used to move the cursor to select the file to be imported, press the
【Select】 key and the selected file will be checked (as shown in the figure below). Or the 【Cancel select】 key
can be pressed to cancel the selection. In addition, the 【Select all】 key can be pressed to select all files.

Transfer will start after pressing the 【Transfer】 key. The "Transfer completed" message will be displayed in the
message prompt area after the process is completed as shown in the figure below.
Advantech-LNC Technology Co., Ltd.
Milling Machine Series
CNC operations
161