Advantech LNC M5800 Series Operation Manual page 10

B. Text symbol and numerical symbol keys:
These letters, symbols, and digits are used mainly for program editing and data input. Some of the symbols are
minimized below the keys. The SHIFT key and the text symbol key must be pressed simultaneously to use these
minimized symbols.
Supplementary editing
Name
Letter
Number
Symbol
Symbol
Symbol
(、)、<、>、，、: 、
&、*、?、[、]、$、%、
Symbol
^、!、@、#、+、=、-、
C. Supplementary editing keys:
These keys can be used in coordination with cursor and the highlighted row on the screen for program
modification, data setting, and page switching.
Supplementary
Name
editing keys
System
reset
Advantech-LNC Technology Co., Ltd.
9
?
keys
X Z
There are 26 letter keys from A to Z which can be used for
U W
location or argument commands.
～
0 9
There are 10 number keys from 0 to 9 which can be used for
=
?
numerical values or input data.
～
／
The section requiring diagonal jump during program editing
1. Pressing this key during program editing will indicate the
end of input program section.
；
0
2. If this key is placed at the very beginning of a program
=
block, it means this block of code will not be executed.
The numerical value needs to be separated by a decimal point
﹒
during program editing.
Symbols to be used during program editing.
_、
1. Default values of system rest status.
2. Cancel alert after the abnormal situation has been cleared.
/ /
/ /
Reset Reset
3. Cancel the machining process after cycle start.
/ / / /
4. Return the cursor to highlight the program header in editing
mode.
Milling Machine Series
Description
Description
CNC operations
5