Getting Started
Transfer Station II Configuration Settings
Configure each Transfer Station II individually using a web page specific to the Transfer Station II.
You configure:
Transfer Station II Settings
l
V300 Camera Settings
l
Important! To use the V300 Transfer Station to upload events, your Evidence Library
software must be EvidenceLibrary.com (EL) or Evidence Library on-premise (EL).
Admin Transfer Station II Settings
1. Connect the Ethernet cable from the Transfer Station II to the computer.
2. Open your web browser and enter https://192.168.2.20, the Transfer Station II default IP address.
3. Log in to your Transfer Station II web page on the Secure Sign In screen.
4. Enter the Username and Password (Admin, V1$T@xfr).
5. Click login.
Transfer Station II Configuration
The Current Transfer Station II Configuration web page opens with the Transfer Station II
default settings.
8
(page
8)
Transfer Station II
Quick Start Guide WGD00172 Rev B