Advertisement
●
Rear
6
7
13
6. Handle
7. Security lock slot
8. Lock button
9. Headphone jack
10. USB Type-A
connector
(downstream)
11. Cable cover
12. Stand
*1
13. Main power switch
14. Power connector
15. LAN port (RJ-45)
16. HDMI connector
17. DisplayPort
connector
18. USB Type-B
connector
(upstream)
19. USB Type-C
connector
(upstream)
20. USB Type-C
connector
(downstream)
*1 An optional arm (or optional stand) can be attached by removing the stand section.
10
Chapter 1 Introduction
11
12
14
15
This handle is used for transportation.
Complies with Kensington's MicroSaver security system.
Use this button to remove the monitor from the stand.
Connects to headphones.
Connects to a peripheral USB device
Holds the monitor cables.
Adjusts the height and angle (tilt and swivel) of the monitor.
Turns the main power on or off.
Connects the power cord.
When using a network connection with the docking station function
this connects to a modem or router with a LAN cable.
Connects to a PC with HDMI output.
Connects to a PC with DisplayPort output.
Connect the USB cable when using software that requires USB connection or when
using the docking station function
Connects to a PC with USB Type-C output. This also transmits the USB signal that
is necessary for using software that requires USB connection or when using the
docking station function
When connecting in a daisy chain connection, this connects to the USB Type-C
upstream connectors of the other monitors in the configuration.
16
17
18
(page
: On,
: Off
(page
36).
(page
36).
8
9
10
19
20
36).
(page
36),
Advertisement
