Subaru IMPREZA 2002 Service Manual page 37

Hide thumbs Also See for IMPREZA 2002:
Table of Contents

Advertisement

PRE-DELIVERY INSPECTION
PRE-DELIVERY INSPECTION
B: PDI PROCEDURE
Follow the procedures shown in the table below.
Static Checks Just After Vehicle Receipt
Step
I . Appearance check
2. Tire check
3. Fuse installation
E h e c k the doors for locklunlock and openlclose
iperations.
5 .
Power window oDeration check
ii+ Check the trunk lid openlclose operations.
7. Check the rear gate for locklunlock and open1
:lose operations.
3. Operation check of trunk lid release handle
3. Operation check of fuel lid opener lock release
ever
10. Accessory check
11. Operation check of hood lock release system
12. Connection of air conditioner harness
13. Battery
14. Brake fluid
15. Engine oil
16. Transmission fluid
17. AT front differential oil
18. Coolant
19. Clutch fluid
20. Window washer fluid
21. Hood latch check
Check point
(1) If the vehicle is covered with protective coating, visually check the vehicle
body for damage and dents. If the protective coating has been removed,
visually check the body paints for small areas of damage or stains.
(2) Visually check the glass and light lenses for any damage and cracks or
excessive gaps to the body sheet metal.
(3) Visually check the plated parts for any damage.
(4) Check the tires for damage, abnormal conditions, and dents on the
wheels.
f5) Check the tire air Dressure.
~
(6) If the vehicle is about to be delivered to the customer, attach a room lamp
fllRF!
(7) Using the key, check if the door can be locked and unlocked normally.
(8) Open and close all doors to see that there are no abnormal conditions.
(9) Operate the power door locking switch to check that all doors is locked
and unlocked normally.
(1 0) Check the power window for correct operations.
(1 1) Operate the trunk lock release lever to check that the trunk opens nor-
mally.
(12) Using the key, check if the trunk lid can be unlocked normally.
(1 3) Open and close the trunk lid to see that there are no abnormal condi-
tions.
(14) Using the key, check if the rear gate can be lock and unlocked normally.
(15) Open and close the rear gate to see that there are no abnormal condi-
tions.
(16) Operate the power door locking switch to check that the rear gate is
locked and unlocked normally.
(17) Operate the trunk lid release lever to check the trunk is unlocked nor-
mally.
(18) Operate the fuel lid opener to check that the fuel lid is unlocked normally.
Check the following accessories are provided:
Owner's manual
Warranty booklet
Service booklet
Spare key
Jack
Tool set
Spare tire
(1) Operate the hood lock release lever to check that the hood opens nor-
mallv.
~
(2) If the vehicle is about to be delivered to the customer, connect the air con-
ditioner harness.
(3) Check the battery for any abnormal conditions such as rust and trace of
battery fluid leaks.
(4) Check the fluid amount.
(5) Check the oil amount.
(6) Check the fluid amount.
(7) For AT, check the front differential oil.
(8) Check the AT front differential oil amount.
f9) Check the coolant amount.
(10) Check the clutch fluid amount.
(1 1) Check the window washer fluid amount.
(12) Check that the hood is closed and latched securely.
PI-3

Advertisement

Table of Contents
loading

Table of Contents