Xerox CX User Manual page 16

8
The default virtual printers are:
ProcessStore
●
Files sent to this printer are automatically processed and stored
in ready-to-print (RTP) format in the Storage area. Later, you
can submit an RTP job for printing, or change the parameters of
the job and resubmit it for processing or printing.
ProcessPrint
●
Files sent to this printer are automatically processed and
immediately sent to the press for printing.
SpoolStore
●
Files sent to this printer are spooled to the Storage area and
wait until you submit them for processing and printing. The files
remain in PDL format (such as PS, PDF, VIPP, VPS, and PPML).
Print Driver software
Use the Print Driver software to set job parameters when you are
submitting a job to the CX print server from any application in your
computer. The Print Driver software is automatically installed on a
Windows computer when you set up a network printer.
Note: On a Mac computer, you must install the Print Driver software manually.
In the Print Driver window, you can perform the following actions:
Define or change job parameters regardless of whether your
●
computer is connected to the server
Lock a job
●
Save a set of parameters. Sets are useful when you want to
●
print different jobs with the same parameters, or if you want to
reprint a job.
Retrieve a saved set of parameters
●
Check the status of the printer
●
Define PostScript parameters for the job
●
Preview imposition layout
●
Chapter 2—Setting up your computer for printing