Altinex Signal Management Solutions Pop ‘N Plug PNP415 User Manual

PNP415/417 PNP415/417
PNP415/417 PNP415/417
Welcome!
We greatly appreciate your purchase of the PNP415/417 Pop 'N Plug with
Custom Tabletop Surface. We are sure you will find it reliable and simple to
use. Superior performance for the right price, backed by solid technical and
customer support is what ALTINEX has to offer.
We are committed to providing our customers with
Signal Management Solutions ® to the most demanding audiovisual
installations at very competitive pricing and we welcome you to join the
ranks of our many satisfied customers throughout the world.

1. Precautions and Safety Warnings

Please read this manual carefully before using your PNP415/417
Interconnect Box. Keep this manual handy for future reference. These safety
instructions are to ensure the long life of your PNP415/417 and to prevent
fire and shock hazards. Please read them carefully and heed all warnings.
1.1 General
•
Unauthorized personnel shall not open the unit since there are
high-voltage components inside.
•
Qualified ALTINEX service personnel, or their authorized
representatives, must perform all service
1.2 Installation Precautions
•
For best results, place the PNP415/417 in a dry area away from dust and
moisture.
•
To prevent fire or shock, do not expose this unit to water or moisture.
Do not place the PNP415/417 in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid. Exposure to direct
sunlight, smoke, or steam can harm internal components.
•
Handle the PNP415/417 carefully. Dropping or jarring can damage the
unit.
•
Never place fingers inside the openings of the unit. This action could
cause serious injury due to sharp edges inside the PNP415/417.
•
Do not place heavy objects on top of the PNP415/417. Do not use
excessive force to push down on the top of the unit.

2. Installation Procedures

Step 1. Refer to the ALTINEX website, www.altinex.com, to download the latest templates and instructions for tabletop cutting requirements and installation
instructions. In order to do this, locate the PNP415 or PNP417 on the website and go to its detail page. The links to the templates, user guide, and
more are on the details page.
Step 2. Print all information applicable to the installation of the PNP415/417, including the templates and any detailed installation instructions.
Step 3. Cut an opening into the table's surface. This operation should be performed by experienced professionals in order to insure accuracy and to be
aesthetically pleasing.
Note: Always confirm dimensions before cutting to insure that specifications have not changed.
Step 4. Install the PNP415/417 into the table per the installation instructions provided on the website.
Step 5. Connect all PNP415/417 cables to their appropriate sources and/or destinations. The PNP415/417 is now ready for operation.

3. Limited Warranty/Return policies

Please see the ALTINEX website at
400-0427-004
®
/Pop 'N Plug /Pop 'N Plug with Custom Tabletop Surface with Custom Tabletop Surface
/Pop 'N Plug /Pop 'N Plug with Custom Tabletop Surface with Custom Tabletop Surface
www.altinex.com for details on warranty and return policies.
•
To turn off the main power, disconnect the power cord which powers
the AC socket on the PNP415/417 pop-up panel. The power outlet used
should be installed as near to the equipment as possible and should be
easily accessible.
•
ALTINEX recommends using wall outlets with a Ground Fault Circuit
Interrupter (GFCI) for maximum protection.
•
Install all cables according to the instructions. Do not force or pull out
any cable or power cord that is attached to the PNP415/417.
1.3 Cleaning
•
Surfaces should be cleaned with a dry cloth. Never use strong
detergents or solvents such as alcohol or thinner. Do not use a wet cloth
or water to clean the unit.
1.4 FCC Notice
•
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions found herein, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
•
Any changes or modifications to the unit not expressly approved by
ALTINEX, Inc. could void the user's authority to operate the
equipment.
1
User's Guide