Altinex Pop 'N Plug PNP415 User Manual

PNP415/417C
Welcome!
We greatly appreciate your purchase of the PNP415/417C
Pop 'N Plug with Custom Tabletop Surface. We are sure you will
find it reliable and simple to use. Altinex offers superior
performance for the right price, backed by solid technical and
customer support.
We are committed to providing our customers with
Signal Management Solutions
audiovisual installations at very competitive pricing and we
welcome you to join the ranks of our many satisfied customers
throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your
PNP415/417C Interconnect Box. Keep this manual handy for
future reference. These safety instructions are to ensure the long
life of your PNP415/417C and to prevent fire and shock hazards.
Please read them carefully and heed all warnings.
1.1 General
Unauthorized personnel shall not open the unit since there

are high-voltage components inside.
Qualified Altinex service personnel, or their authorized

representatives, must perform all service
1.2 Installation Precautions
Install in a dry area away from dust and moisture.

 To prevent fire or shock, do not expose this unit to water or
moisture. Do not place the PNP415/417C in direct sunlight,
near heaters or heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can harm
internal components.
Handle carefully; dropping or jarring can damage the unit.

Never place fingers inside unit openings. This can cause

serious injury due to sharp edges inside the PNP415/417C.
Do not place heavy objects on top of the PNP415/417C. Do

not use excessive force to push down on the top of the unit.
2. Installation Procedures
Step 1. Refer to the Altinex website, www.altinex.com, to download the latest templates and instructions for tabletop cutting
requirements and installation instructions. In order to do this, locate the PNP415 or PNP417C on the website and go to its
detail page. The links to the templates, user guide, and more are on the details page.
Step 2. Print all information applicable to the installation of the PNP, including templates and any detailed installation instructions.
Step 3. Cut an opening into the table's surface. This operation should be performed by experienced professionals in order to insure
accuracy and to be aesthetically pleasing.
Note: Always confirm dimensions before cutting to insure that specifications have not changed.
Step 4. Install the PNP415/417C into the table per the installation instructions provided on the website.
Step 5. Connect all PNP415/417C cables to their appropriate sources and/or destinations. The PNP415/417C is now ready for
operation.
3. Limited Warranty/Return policies
Please see the Altinex website at
400-0427-005
/
®
Pop 'N Plug
®
to the most demanding
www.altinex.com for details on warranty and return policies.
with Custom Tabletop Surface User's Guide
To turn off the main power, disconnect the power cord which

powers the AC socket on the PNP415/417C pop-up panel.
The power outlet used should be installed as near to the
equipment as possible and should be easily accessible.
Altinex recommends using wall outlets with a Ground Fault

Circuit Interrupter (GFCI) for maximum protection.
Install all cables according to instructions. Do not force or

pull any cable or power cord attached to the PNP415/417C.
1.3 Cleaning
Surfaces should be cleaned with a dry cloth. Never use

strong detergents or solvents such as alcohol or thinner. Do
not use a wet cloth or water to clean the unit.
1.4 FCC Notice
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
 This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions found herein, may cause harmful interference to
radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
 Any changes or modifications to the unit not expressly
approved by Altinex, Inc. could void the user's authority to
operate the equipment.
1