Advertisement
Installation of this device should be carried out by a qualified installer
after reading this manual. Dismantling the casing of the device will au-
tomatically void the warranty. Before starting the assembly, make sure
that the connecting wires are not live. Conditions of storage, transport
and use affect the proper operation of the device.
Features of the module
Universal dimmer 230 V AC (works with dimmable light bulbs);
Cooperation with remote control transmitters of the F&Wave system;
The ability to control from up to 8 transmitters;
Local control - the ability to directly control the dimmer using any monostable
button (for example: bell button);
Soft start - smooth lighting switching (on/off);
Small enclosure size;
Screw terminals for easy installation in a Ø60 flush-mounted box;
Retransmission of commands from the transmitter - the ability to increase the
range of the remote control;
Low power consumption - low operating cost;
Built-in electronic thermal protection to prevent damage in case of excessive load
of the dimmer.
Description of the device
- 2 -
Advertisement
