Text Placement Restrictions On The 4213 Printer - Xerox 4213 Programmer's Reference Manual

XES COMMAND LANGUAGE MODE
Margins
2-40
If you enter a change of setting within the printable contents of a
page and the new setting for the bottom margin is below the
current text position, the bottom margin goes into effect for the
next page.
Setting illogical margins, (such as a top margin below a bottom
one), or setting margins out of page boundaries causes the
printer to revert to the default margins.
If the printer
formatting a page, the last command it receives will be used on
the next page.

Text placement restrictions on the 4213 printer

The following restrictions apply to page boundaries on the 4213
printer:
Any text printing beyond the bottom edge of the paper is
•
printed on the next page.
Any character printing beyond the right edge of the paper is
•
not printed.
Purpose Sets all four margins for a page.
Syntax
E mH,T,B,L,R
m
H,T,B,L,R
H
T
B
receives several Margins
L
Instruction to set margins.
Margin values in units of either five pixels (1/60th
inch or .42 mm) or one pixel (1/300th inch or .08
mm), with commas to separate values.
Height of the page. The distance between the top
edge and the bottom edge of the page.
Top margin. The distance from the top edge of the
page to the baseline of the characters in the first
line of text.
Bottom margin. The distance from the bottom
edge of the page to the baseline of the last line of
text.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
commands while