Test Running; Prepare Remote Controller - LG ASNQ092BRW0 Manual

Inverter Single
13. Installation

Test Running

1. Check that all tubing and wiring are properly connected.
2. Check that the gas and liquid side service valves are fully opened.

Prepare remote controller

1. Remove the battery cover by pulling it according to the
arrow direction.
2. Insert new batteries making sure that the (+) and (–) of
battery are installed correctly.
3. Reattach the cover by pushing it back into position.
NOTICE
• Use 2 AAA(1.5volt) batteries. Do not use rechargeable
batteries.
• Remove the batteries from the remote controller if the
system is not used for a long time.
1. Pull out the triple filter and allergy free filter from the separately packed plastic bag.
2. Insert the triple filter into the left case and insert the allergy free filter into the right case.
h Error Indicator : lights up Blue lamp(1 digits) and Red lamp (10 digits) alternately.
Number of lamp's blink : indicate Error code.
Error code
01
02
03
05
06
10
12
112 _
Inverter Single-60Hz(R410A)
Allergy Free Filter
Triple Filter
Indoor ROOM themistor error (TH1)
Indoor IN-PIPE thermistor error (TH1)
Remote controller error
Communcation error between in and out
Indoor OUT-PIPE thermistor error (TH2)
Indoor BLDC fan lock
Indoor MID-PIPE thermistor error (TH3)
Description