Table of Contents
Advertisement
INSTALLATION
16
Installation of filters
Premium type
1
Pull out the 3M Filter from the separately
packed plastic bag.
2
Detach the two nitto tapes from the filter.
3
Insert the filter into the filter case.
4
Detach two nitto tapes from the plasma fil-
ter.
3M Filter
Rational type
1
Pull out the 3M Filter from the separately
packed plastic bag.
2
Insert the 3M Filter into the left or right
3M Filter
case.
3
Detach two nitto tapes from the plasma fil-
ter.
3M Filter
3M Filter
* The feature can be changed according to
type of model.
Test Running
- Check that all tubing and wiring are properly
connected.
- Check that the gas and liquid side service
valves are fully open.
1
2
3
Plasma Filter
Plasma Filter
Plasma Filter
Plasma Filter
Prepare remote controller
Remove the battery cover by pulling it ac-
cording to the arrow direction.
Insert new batteries making sure that the
(+) and (–) of battery are installed correctly.
Reattach the cover by pushing it back into
position.
!
NOTE
• Use 2 AAA(1.5volt) batteries. Do not use
rechargeable batteries.
• Remove the batteries from the remote
controller if the system is not used for a
long time
Advertisement
Table of Contents
