LG ASNQ092BRW0 Manual page 98

Inverter Single
12. Remote controller
Using the remote control
You can operate the air conditioner more conveniently with the remote control. You will find the
buttons for the additional functions under the cover of the remote control.
CANCEL
ON OFF
AUTO CLEAN
98 _
Inverter Single-60Hz(R410A)
Signal
Control
transmitter
Display
screen
Control
panel
SET
Flip-up door
(opened)
* Some functions may not be supported, depending on the model.
Display
panel screen
START/STOP BUTTON
Used to turn off/on the unit.
OPERATION MODE SELECTION BUTTON*
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR BUTTON
Used to select fan speed in four steps
low, medium, high and CHAOS.
JET COOL/HEAT BUTTON*
Used to start or stop the speed cooling/heating.
(It operates fan in super high speed)
CHAOS SWING BUTTON
Used to stop or start louver movement and set the
desired up/down airflow direction.
ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping
operation.
TIME SETTING BUTTONS
Used to adjust the time.
TIMER SET/CANCEL BUTTON
CANCEL
SET Used to set and to cancel the timer operation.
SLEEP MODE AUTO BUTTON*
Used to set sleep mode auto operation.
AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or
heating.
ENERGY-SAVING COOLING MODE BUTTON*
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
RESET BUTTON
Used prior to resetting time.
2ND F BUTTON
Used prior to using modes printed in blue at the
bottom of buttons.
AUTO CLEAN BUTTON
Used to set auto clean mode.
In some models this button has a 2nd function of
display luminosity
Description