Econo Operation - Daikin FTKM25PVM Operation Manual

ECONO Operation

ECONO operation is a function which enables efficient
operation by limiting the maximum power consumption
value.
This function is useful for cases in which attention
should be paid to ensure a circuit breaker will not trip
when the product runs alongside other appliances.
To start ECONO operation
1. Press "ECONO/QUIET button" and
select "
• Each time the "ECONO/QUIET button" is pressed
a different setting option is displayed on the LCD.
• By selection "
the air conditioner will be in ECONO operation
combined with OUTDOOR UNIT QUIET operation.
ECONO OUTDOOR UNIT
To cancel ECONO operation
2. Press "ECONO/QUIET button".
• Press the button to select "Blank".
Running current and
power consumption
Normal
operation
ECONO
Mode
• This diagram is a representation for illustrative purposes only.
• The maximum running current and power consumption of the air conditioner in ECONO
mode vary with the connecting outdoor unit.
NOTE
• ECONO Operation can only be set when the unit is running. Pressing the OFF button
causes the setting to be canceled, and the "
• ECONO operation is a function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in COOL and DRY modes.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power
consumption is already low.
20
" on the LCD.
" from the following icons,
Combination
QUIET
Maximum during
normal operation
Maximum during
ECONO Mode
From start up until set
temperature is reached
blank
No Setting
Time
" disappears from the LCD.
1, 2