Certificate Injection Instructions - NetComm CloudMesh NS-01 Firmware Upgrade Manual

Satellite access point

Hide thumbs Also See for CloudMesh NS-01:

NS-01 Certificate injection instructions

IMPORTANT: The certificate must inject first before the upgrade

Using the same computer that you had set the static IP address on in the previous section:

Connect the supplied RJ45 Ethernet cable from one of the ethernet ports on the bottom of the NS-01 to your

computer.

Connect the supplied power adapter to your NS-01.

Allow 60 seconds for the NS-01 to power up.

Copy the Tiger Certificate Injection Script.zip to your desired location right click and click on Extract all to decompress

the script

Click Extract. This may take a couple of minutes.

Browse to the extracted contents. There should be two folders. Double Click to enter the runner folder.

Double click on Tiger Cert Injection Script.exe to run the script.

Firmware Upgrade Guide

FW01226 v1.0 24 March 2020

7 of 11

Table of Contents

Show Quick Links