Introduction; Prerequisites; Notation - NetComm CloudMesh NS-01 Firmware Upgrade Manual

Introduction

Periodically both the gateway and its satellites will have firmware updates released to improve their performance.
We recommend always applying the latest upgrade when it becomes available, and at the same time you should check that
the other components of the mesh also have their most recent version of firmware installed.

Prerequisites

Before continuing with the installation of any new firmware, please confirm that you have:
A PC running Windows
A CloudMesh Satellite(s) with power supply
A Barcode Reader (recommended)
An Ethernet cable (Straight-through, supplied in the boxes)
This document is to rework devices which do not have certificates.
This document is applicable for NS-01 CloudMesh Satellites running Firmware: V1.77
This instruction applies to NS-01 CloudMesh Satellites with SN 997125193800001-997125194400805
This script is to rework one device at a time

Notation

The following symbols may be used in this document:
Note – This note contains useful information.
Important – This is important information that may require your attention.
Warning – This is a warning that may require immediate action in order to avoid damage or injury.
Firmware Upgrade Guide
FW01226 v1.0 24 March 2020
4 of 11
© NetComm Wireless 2020