Advertisement
1. Flange locknut (3/8 inch)
2. 10 mm (3/8 inch)
holes—mower deck
Note:
Retain the carriage bolts and kicker fitting for
installation.
Removing the Baffles
Note:
Determine the left and right sides of the
machine from the normal operating position.
1.
At the bottom, left side of the mower deck,
remove the 3 carriage bolts (3/8 x 1 inch) and 3
flange locknuts (3/8) that secure the left baffle
to the mower deck side plate, the left baffle
support; and the left divider; and remove the left
baffle
(Figure
41).
1. Flange locknut (3/8 inch)
2. Left divider
3. Left baffle support
4. Left side plate (mower
deck)
2.
Install a flange-head capscrew (3/8 x 1 inch)
into the 10 mm (3/8 inch) holes in the mower
Figure 40
3. Flange-head capscrew
(3/8 x 1 inch)
Figure 41
5. Front of the machine
6. Left baffle
7. Carriage bolt (3/8 x 1 inch)
deck
(Figure
the flange locknut (3/8 inch) that you removed
in step 1.
g284406
1. Flange locknut (3/8 inch)
2. Right side plate (mower
deck)
3.
At the bottom, center side of the mower deck,
remove the 3 carriage bolts (3/8 x 1 inch) and 3
flange locknuts (3/8) that secure the center baffle
to the left divider, center/right baffle support,
and right divider; and remove the center baffle
(Figure
43).
1. Flange locknut (3/8 inch)
g284291
2. Right divider
3. Carriage bolt (3/8 x 1 inch) 7. Front of the machine
4. Center/right baffle support
4.
At the bottom, right side of the mower deck,
remove the 3 carriage bolts (3/8 x 1 inch) and 3
flange locknuts (3/8) that secure the right baffle
to the mower deck side plate, the center/right
baffle support; and the right divider; and remove
the right baffle
18
42) and secure the capscrews with
Figure 42
3. Flange-head capscrew
(3/8 x 1 inch)
Figure 43
5. Left divider
6. Center baffle
(Figure
44).
g284407
g284289
Advertisement
