9
Position the GripLock™ buckle so the black cylinder pad (with Apeks logo)
is facing up. Insert the cylinder band through the slot in the GripLock™
buckle, secure hook and loop material (Figs. 13 & 14).
Cylinder Pad
Figure 13
BLACK ICE TWIN CYLINDER SETUP COMPLETE
CONSULT THE BLACK ICE OWNER'S MANUAL THAT CAME WITH YOUR
BC FOR INFORMATION ON MAXIMUM CYLINDER CAPACITY, ADJUSTING /
SECURING THE GRIPLOCK™ CYLINDER BANDS AND VALVE STRAPS.
If you have any questions regarding the information found in this manual, please
contact your regional Apeks Dealer or Distributor. Distributor contact information
is available on the Apeks website at
Figure 14
www.apeks.co.uk
Literature PN 18318 Rev. 10/12
Apeks Black Ice Twin Cylinder Kit
PN 427106
Contents:
•
(1) Valve Strap
•
(2) Removable Buckles
•
(1) Twin Cylinder Block
•
(1) GripLock™ Cylinder Band
Installation of Black Ice Twin Cylinder Kit
READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY
1
Unbuckle
the
valve
strap
and locate valve strap loops.
These are sewn into the harness
on both sides of the valve strap
slot (Fig. 1).
2
Insert open end of removable buckle through the valve strap loop. Lock the
end of the removable buckle. Repeat the process for other side (Figs. 2 & 3).
Figure 2
Valve Strap
Loops
Figure 1
Lock Ends
Figure 3