Frequency Mode; Backlight And Sound; Fm Radio - Radioddity GA-510 Programming Manual

Beep(keypad beep) Allows audible confirmation of a key press

3) Frequency mode

STEP: Select the amount of frequency change in VFO/Frequency mode when scanning or pressing
the keys.
SFT_D: Enable access of repeaters in VFO/Frequency Mode ([OFF]: TX = RX (simplex); [+]: TX will be
shifted higher than RX in frequency; [-]: TX will be shifted lower than RX in frequency)
Offset: Specifies the difference between the TX and RX frequency
(For the explanation of TX Power, RX QT/DQT, TX QT/DQT, W/N, Signal, please refer to the section 3)

4) Backlight and Sound

RPT Noise Clear: Squelch Tail elimination
RPT Noise Detect:Trunk tail delay

5) FM Radio

FM Radio Enable: When you check off, FM Radio function will be activated on the radio.
Roger: Sends an end-of-transmission tone to indicate to other stations that the transmission has
ended
9