Line Settings Line Settings; Send Faxes; Receive Faxes - Vidicode Octo Manual

5 Line settings
The Fax Sever features line options to be set for each line individually.
Press the
The display will show:
NEXT
Press NEXT NEXT to select the line that needs to be configured. NEXT NEXT
•
Press MENU MENU to start configuring Line 1.
MENU MENU
•
Another possibility is pressing 1 till 8 on the numeric keypad to jump
directly to the desired line number.
After entering a line menu it is possible to press 1 till 8 on the numeric
keypad to jump directly into another line menu.
The following sequence of menu items will appear:

5.1 Send Faxes

Each line can be configured separately to send faxes. If set to 'Off' this
line number is not used by the system to send faxes. If set to 'On' the
system will take this line and dial out in an attempt to send a fax.
Install Line 1
Send Faxes:
NEXT
Press CHANGE CHANGE to enable/disable this setting. CHANGE CHANGE
•
Press NEXT NEXT to move on to the next menu item. NEXT NEXT
•

5.2 Receive Faxes

Each line can also be configured to receive faxes. If set to 'Off' this line
number will not take the line on incoming calls. If set to 'On' the call is
answered automatically by the system and an attempt is made to receive
a fax. Answering to calls also depends on Rings to Answer below.
Manual Fax Server Octo | Quarto © 2008-2014 Vidicode®
to enter the Settings menu, then soft key
Install Line 1
MENU
CHANGE
Off
System
STOP
BACK
39