How to deal with problems
8.
How to deal with problems
On grounds of external factors or possible damage as well as extremely close
process tolerances during manufacturing, it may occur that a vehicle does
not function properly any longer.
Fault description
EN
Vehicle does not
move. Howe-
ver, additional
functions can be
activated.
Vehicle is with-
out function.
Special functions
cannot be acti-
vated either.
Vehicle stops
with its hazard
warning signal
flashers being
switched on
44
Source
Dirt within the
gear
Programming of
decoder wrong
Rechargeable bat-
tery empty
Vehicle faulty
Vehicle is out-
side the activated
safety area of the
installation
Remedy
Clean the vehicle.
X
Set the decoder back to its
X
default settings.
Recharge the vehicle.
X
Consult FALLER's custo-
X
mer service department.
Put the vehicle back into
X
the safety area of the ins-
tallation, if need be deac-
tivate or extend the safety
area. For further informa-
tion please refer to the
instruction manual of the
software »Car System
Digital«.
Need help?
Do you have a question about the Car System Digital 3.0 and is the answer not in the manual?