Pads; Rgb Colors; Triggering Notes; Plus And Minus Pads - PRESONUS ATOM SQ Owner's Manual

2 Standard Controller Mode
2.2

Pads

Setup Mode: Page 3
Pads
2.2
2.2.1

RGB Colors

2.2.2

Triggering Notes

2.2.3

Plus and Minus Pads

4. MCU Mode. When selected, the Transport buttons, navigation
buttons, and the display buttons for the first page of Song
mode will send common Mackie MCU commands.
5. HUI Mode. When selected, the Transport buttons, navigation
buttons, and the display buttons for the first page of Song
mode will send common Mackie HUI commands.
6. MIDI Mode. This is default mode for ATOM SQ that allows for user customization.
Note: HUI and MCU mode functions will vary depending on the software application
being used. Mardi Gras, MCU, HUI, and MIDI modes are not available while using
Studio One.
Version 1.10
Setup
The last page of Setup Mode displays the firmware
version installed on your ATOM SQ.
Pads change color depending on which pad layout mode is
selected. Pad color can also be changed in certain modes.
All 32 pads are velocity sensitive. Strikes with less force result in a quiet sound,
and strikes with more force result in a louder sound (unless Full Velocity or
16-vel is enabled). All pads are also sensitive to pressure. After striking and
pressing down on a pad, more or less pressure can be applied to control multiple
expressive parameters, such as Aftertouch, if available in your software.
The + and - pads are pressure sensitive buttons. They can be assigned to either Pitch
Bend or Octave Up/Down commands.
ATOM SQ
Owner's Manual
6