Instrument Mode - PRESONUS ATOM SQ Owner's Manual

3 Advanced Studio One Integration
3.2 Screen Controls

Instrument Mode

3.2.1
3.2.1.1 Browse
When Instrument mode is engaged, the screen on your ATOM SQ will display
commonly used commands to browse and load Instruments, add or manage
Events, as well as configure certain pad and performance parameters.
1 2 3
Instruments Instrument Note FX
Browser Editor Editor
Browse
Open Browser
Load Close Open
Selected Folder Folder
6
4 5
1. Instruments Browser. Opens or closes the Instruments tab of the browser.
Note: that Studio One initially defaults to the "Home" tab at launch. Pressing
the "Instruments Browser" button will jump directly to the Instruments tab.
While the Browser is open:
• Screen Encoder will select the next or previous item in the list
•
Navigation arrows Up, Down, Left, and Right will also select the next
or previous item in the list. Note: These arrows are different than the Page
Left and Page Right arrows which are directly below the Screen Encoder.
2. Instrument Editor. Shows or hides the currently
selected virtual instrument window.
3. Note FX Editor. Shows or hides the Note FX Editor.
4. Load Selected. Loads the currently selected Instrument or Instrument
Preset onto a new track. Press Shift + Load Selected to replace a track's
current Instrument with the newly selected Instrument from the Browser.
5. Close Folder. Closes the current folder or collapses a menu
depending on the folder tree mode selected in the Browser.
6. Open Folder. Opens the next folder or expands a menu
depending on the folder tree mode selected in the Browser.
ATOM SQ
Owner's Manual
19