PRESONUS ATOM SQ Owner's Manual page 48

5 Studio One Artist Quick Start
5.3 Creating a New Song
2. Click on the Audio I/O Setup tab.
3. From the Inputs tab, you can enable any or all of the inputs on your
audio interface that you'd like to have available. We recommend that you
create a mono input for each of the inputs on your interface. If you plan
on recording in stereo, you should also create a few stereo inputs.
4. Click on the Outputs tabs to enable any or all of the outputs on your
audio interface. In the lower right corner, you will see the Audition
Select menu. This allows you to choose the output from which you
will audition audio files prior to importing them into Studio One
Artist. In general, you will want this to be the main output bus.
Power User Tip: If you would like this I/O configuration to be the same every time you
open Studio One, click the Make Default button.
ATOM SQ
Owner's Manual
46