Xerox CopyCentre C118 Quick Reference Manual page 107

016-730
016-732
016-744
016-749
016-751
016-752
016-753
016-754
016-755
016-757
016-758
016-759
016-760
016-761
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide
Code
An unsupported command was detected. To print again, check the print
data and delete the command that caused the error.
The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
The machine could not print the PDF file because it contains features
not supported in the machine. Open the file in Adobe Reader and select
[Print] from the [File] menu to print it.
A PJL command syntax error occurred. Check the print settings, or
correct the PJL command.
The machine could not print the PDF file using ContentsBridge Utility.
Open the file in Adobe Reader and select [Print] from the [File] menu to
print it.
The machine could not print the PDF file using the ContentsBridge utility
because of insufficient memory. Change the print mode in
ContentsBridge as follows and try again.
• If the high quality mode is selected, change it to the standard mode.
• If the standard mode is selected, change it to the high speed mode.
A password entered for the direct print is incorrect. Enter a password
correctly.
The machine could not print the PDF file because it contains objects that
are compressed using the LZW algorithm.
Print the file using the following methods.
• Open the file in Adobe Reader and select [Print] from the [File] menu.
• Use the PostScript feature.
The machine could not print the PDF file because it does not allow
printing. Open the file in Adobe Acrobat (not Adobe Reader) and
deselect the [No Printing] check box in the document security settings,
and print again.
The password entered is incorrect. Enter the correct password.
The account is not authorized for copying. Contact the Key Operator.
The maximum number of copies has been reached. Contact the Key
Operator.
An error occurred during PostScript processing. Take one of the
following actions.
• Set for optimized speed in the print driver.
• Increase the size of the print page buffer.
• Increase PostScript memory.
An error occurred during image processing. Set for optimized speed in
the print driver and try again. If this does not fix the problem, set for
highest compatibility to ensure printing and try again.
Description and Corrective Action
Fault Codes
105