Xerox CopyCentre C118 Quick Reference Manual page 106

9 Problem Solving
S10025
S10026
S10027
Z-10
003-747, 016-799
016-500
016-501
016-502
016-503
016-504
016-505
016-701
016-702
016-709
016-719
016-720
016-721
016-726
104
Code
The document has jammed. Open the document feeder cover and
remove the documents.
During document scanning, the document glass cover opened. Open
the document feeder cover and remove the documents.
During document scanning, the document feeder cover opened. Close
the document feeder cover.
Turn the power off and on. If the error cannot be resolved, contact the
Xerox Welcome Center.
The print parameter combination was wrong. Check the print data.
SMTP server name is not set correctly when reply mail was transmitted.
Check if the SMTP server was set correctly.
POP3 server name is not set correctly when using POP3 protocol.
Check if the POP3 server was set correctly.
Failed to login to POP3 server when using POP3 protocol. Check if the
user name and password used for the POP3 server are set correctly.
SMTP server name is not set correctly when e-mail was transmitted.
Check if the SMTP server was set correctly. Also, check that the DNS
server is set correctly.
POP3 server name is not set correctly when e-mail was transmitted.
Check if the POP3 server was set correctly. Also, check that the DNS
server is set correctly.
Failed to login to POP3 server when transmitting e-mail. Check if the
user name and password used for the POP3 server are set correctly.
PCL print data could not be processed because of insufficient memory.
Lower the resolution, or process without setting double-sided or
Multiple-Up printing.
PCL print data could not be processed because of insufficient print page
buffer. Take one of the following actions.
• Lower the resolution the printer driver.
• Increase the size of the print page buffer.
• Add on memory.
An error occurred while ART EX processing. Instruct the machine to
print again.
There is insufficient memory used for PCL. Increase the memory.
A PCL command error occurred. Check the print settings, or correct the
PCL command.
An error occurred while printing job. Instruct the machine to print again.
If an error cannot be resolved, contact the Xerox Welcome Center.
The print language could not be selected. Select print language.
Description and Corrective Action
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide