Advertisement
Assembly Manual
Fasten swivel bracket (A)
with 2 set screws (B)
in the rear slot.
Mount the installed swivel
bracket (A) (position above
the speaker) with screw (D)
and washer (E) onto fastening
bracket (C).
Assembly spacing of brackets
Model
P 02-Pi
Spacing of
242 mm
brackets
Check all screw connections for fi rm fi t and friction locking. The individual assemblies are to be
checked to ensure that they are form fi tting, and screw connections are to be re-tightened where
appropriate.
5. Transport and storage
The product is to be transported with care to prevent any damage that would impair its function.
The product is designed for both indoor and outdoor applications. Prolonged storage in liquids, e.g.
water, is to be avoided.
© Pan Acoustics GmbH
Attach fastening bracket (C)
(position above the speaker)
to the wall using two suitable
screws. Observe the spacing
between the brackets accord-
ing to the table "Assembly
spacing of brackets".
Mount the installed swivel
bracket (A) (position below
the speaker) with screw (D)
and washer (E) onto fastening
bracket (C).
P 04
P 08-Pi
PB 04
PB 08
469 mm
920 mm
V 1.0
Attach fastening bracket (C)
(position below the speaker)
to the wall using two suitable
screws. Observe the spacing
between the brackets accord-
ing to the table "Assembly
spacing of brackets".
P 16-Pi
PB 16
1826 mm
Speaker Mount TWM II
For spacing
of brackets,
see table
Page 5 of 6
Advertisement
