Teufel Power Edition Concept E Magnum Technical Specifications And Operating Instructions page 15

Setting the DVD player • AV receiver
Adjustment to the DVD player with
5 .1 analogue output
The Concept E Magnum itself does not have
a built-in decoder function. Therefore it is
"dependent" on the external decoders to split
the signals. This decoder is a component of the
DVD player software.
Its set-up options differ greatly from appliance
to appliance. Please consult the handbook for
your DVD player.
The following basic settings
should always be made:
Our front/centre/rear speakers should be
Ě
defined in the speaker set-up menu (speaker
management/bass management) of the DVD
player as "small" or "normal".
Set the subwoofer to "on" or "yes" on the
Ě
speaker set-up menu.
The optimal cut-off frequency is 120 Hz.
Ě
100Hz or 150Hz are also possible.
Turn the frequency control on the subwoofer
Ě
itself to "maximum".
Adjustment to the AV receiver
During operation on the AV receiver, the Concept
E Magnum is always dependent on the optimal
setting of the AV receiver. Only when the receiv-
er's decoder assigns the signals optimally will all
of the boxes of the Teufel speaker set be acti-
vated, because the Concept E Magnum itself has
no built-in decoder function. The set-up options
for the AV receiver differ greatly from appliance
to appliance. Please consult the handbook for
your AV receiver.
The following basic settings
should always be made:
Our front/centre/rear speakers should be
Ě
defined in the speaker set-up menu (speaker
management/bass management) of the AV
receiver as "small" or "normal".
Set the subwoofer to "on" or "yes" on the
Ě
speaker set-up menu.
The optimal cut-off frequency is 120 Hz.
Ě
100Hz or 150Hz are also possible.
Turn the frequency control on the subwoofer
Ěs
itself to "maximum".
15
· CEM Power Edition