HONOR Band 5i User Guide Issue Date 2019-10-23 HUAWEI TECHNOLOGIES CO., LTD.
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
1.9 Setting the time zone and language..........................13 1.10 Viewing the Bluetooth name, MAC address, and Serial Number................13 1.11 Checking system information............................. 13 1.12 Updating your band and the Huawei Health app......................14 1.13 Restoring the band to factory settings........................14 2 App management.........................15 2.1 Message reminders...............................
1.9 Setting the time zone and language 1.10 Viewing the Bluetooth name, MAC address, and Serial Number 1.11 Checking system information 1.12 Updating your band and the Huawei Health app 1.13 Restoring the band to factory settings 1.1 Wearing your band To make sure that activity and sleep tracking and heart rate monitoring work properly, make sure you are wearing your band correctly as shown in the following figure.
For Android users: Search for and install the latest version of the Huawei Health app in an app store on your phone. (For Huawei device users, search for and install the Huawei Health app through AppGallery.) Open the Huawei Health app, go to Devices >...
If the band screen flickers or goes black, connect it to a power source to restart the band. l Use a Huawei charger with a rated output voltage of 5 V and a rated output current of 1 A or above or a computer to charge your band.
If the screen is on, just tap the screen to check the battery. Alternatively go to More > Battery to check it. You can also open the Huawei Health app on the connected phone and touch Devices to see the battery level.
The screen will sleep again after 5 seconds if you don't do anything. l You can enable Raise wrist to wake screen in the Huawei Health app. l The maximum length of time that the screen of your band can stay on is 5 minutes. To extend the length of time that the screen stays on time, do the following: go to More >...
Method 2: Check the back of your band for the MAC address. The 12 alphanumeric characters are your band's MAC address. Method 3: If your band is connected to a phone through the Huawei Health app, open the Huawei Health app, touch Devices, and then touch your device's name. The information next to Restore factory settings is the MAC address.
To check your band's version, go to More > System, and touch About. Method 2: Check through the Huawei Health app. If your band is connected to the Huawei Health app, open the app and touch Devices and your device. Then touch Firmware update to check the band's version.
Update your band and the Huawei Health app to the latest version. Set the Huawei Health app as a protected app to ensure that the app runs in the background. For Android users: Open the Huawei Health app, touch Devices, and then touch your device.
Proceed to mute the call. 2.5 Remote photo shooting This feature is only available on Huawei phones running EMUI 8.1 or later. After connecting your band to your phone, open Camera on your phone, and your band screen will turn on and display the camera icon shown below.
2.8 Setting an alarm You can use the Huawei Health app to set a Smart alarm or an Event alarm for a connected band. A Smart alarm, has two conditions to go off, it needs to be around when the time it was set for and you need to be in light sleep.
Bluetooth range, it will play a ringtone (even in Silent mode), notifying you of its whereabouts. l To use this feature, ensure that the band is connected to your phone, and the Huawei Health app is running in the background or foreground.
Method 2: View your daily activity data through the Huawei Health app. View your detailed activity data on the home screen in the Huawei Health app. l To view yourdaily activity data in the Huawei Health app, ensure that your band is connected to the phone using the Huawei Health app.
Stay as still as possible during the measurement. l The heart rate data from manual measurements will not be synced to the Huawei Health app. l The measurement will be interrupted if you swipe right on the band screen, receive an incoming call, or an alarm goes off.
During the workout, if your heart rate exceeds the value that you set in the Huawei Health app ("220 – your age" by default), your band will vibrate to notify you. Touch the Home key or swipe right on the screen to dismiss the alert.
It can automatically detect when you fall asleep and wake up and whether you are in a light or deep sleep. You can sync and view your sleep data in detail in the Huawei Health app. You can enable HUAWEI TruSleep in the Huawei Health app.