Power Adaptor Connection; Transformer Safety Notice; How To Use The Microphone - VTech Kidi Super Star DJ Parents' Manual

POWER ADAPTOR CONNECTION

• Make sure the unit is turned OFF and ensure no batteries remain
inside the unit.
• Locate the 3.5mm DC Jack on the side of the unit.
• Connect the power adaptor (not included) into the unit's 3.5mm DC
Jack.
• Insert the other end of the power adaptor into a plug socket.
• Make sure the plug socket switch is ON and then turn the unit ON.

TRANSFORMER SAFETY NOTICE

• Using a 3.5mm DC 6V power adaptor (not included) that complies
with EN61558 is recommended.
• This toy should only be used with a transformer for toys.
• The transformer is not a toy.
• This toy is not intended for use by children under 3 years old.
• Do not connect the toy to more than the recommended number of
power supplies.
• Never clean a plugged in toy with liquid.
• Please regularly examine the transformer, checking for damage to
the cord, plug, transformer or other parts. Do not use the transformer
if there is any damage to it.
NOTE: If the unit stops working or the sound becomes weak, it may be
because of a fault with the power adaptor connection.
Turn the unit OFF and unplug the adaptor for 15 seconds. Then plug
the adaptor back in and turn the unit ON. If the problem persists, the
adaptor you are using may be faulty.

HOW TO USE THE MICROPHONE

Plug in the included microphone into the microphone jack. Please
make sure it has a firm connection.
Slide the Microphone ON/OFF switch up to (I) to turn the microphone
ON. Speak into the microphone as closely as possible for a loud and
clear volume output.
To avoid picking up any unnecessary harsh sounds, please ensure that
the microphone is kept away from the speaker and that the microphone
is switched OFF whenever it is not in use.
12