Setup; Power Source; Main Unit Battery Installation; Main Unit Ac Adaptor Connection - VTech Me Mo Mo User Manual

SETUP

1. For first time setup of Me-Mo-Mo™, please insert 2 AA batteries in the keyboard.
(2 AA batteries are not included for the keyboard).
2. Press the Power button
any key on the keyboard to exit the demo mode.
3. Press the Power button
set the clock by following the directions in the "SETTING THE TIME" section of
this manual.

POWER SOURCE

Me-Mo-Mo™ operates on a total of 6 AA (UM-3/LR6) batteries and 1 CR2032
backup battery.
It will also operate using a 9V 300mA AC center-positive
with 2 AA (UM-3/LR6) batteries and 1 CR2032 backup battery.

MAIN UNIT BATTERY INSTALLATION

(4 AA batteries come installed in the unit.)
1. Make sure the unit is turned OFF. The screen will be blank
or will show the clock mode.
2. Locate the battery cover on the back of Me-Mo-Mo™
and open it.
3. Insert 4 new AA (UM-3/LR6) batteries, as illustrated.
(The use of alkaline batteries is recommended for
maximum performance.)
4. Close the battery cover.

MAIN UNIT AC ADAPTOR CONNECTION

Use a standard 9V 300mA AC center-positive
batteries in the main unit.
1. Make sure the unit is OFF or in the clock mode.
2. Locate the adaptor jack at the bottom of Me-Mo-Mo™.
3. Plug the adaptor into the unit's adaptor jack.
4. Plug the adaptor into a wall outlet.
NOTE: Do not leave the adaptor plugged in for long periods of time if the unit is
not in use.
and watch Me-Mo-Mo™ spring to life!
again and the clock mode will appear. You can
The power adaptor is sold separately.
2
(sold separately)
adaptor instead of the 4 AA
Press