Honeywell T775M Programming page 6

Fig. Program - Setpoint
1. From the menu, use the
2. Press the
3. Use the and
temperature.
Set the temperature to 100° F.
4. Press the
option.
_____________________________________________________________________
Fig. Program – Differential
1. From the menu, use the
2. Press the
3. Use the and
Set the value to 10° F.
4. Press the
and
button to display the setpoint value.
buttons to increase/decrease the desired setpoint
button to accept the setpoint temperature and display the next
and
button to display the differential value.
buttons to increase/decrease the desired value.
button to accept the value and display the next option.
) ! "
buttons to highlight SETPOINT (Fig. 2).
) #! & " ! '
buttons to highlight DIFFERNTL.
& ' .
! "$