Adjusting The Cutoff Frequency Value; Speaker Level; Time Alignment - Pioneer DMH-220EX Operation Manual

Menu Item

[Speaker Level]

[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer] [Listening
Position]
[Crossover]
[Subwoofer Settings]
[Listening Position]
[Off] [Front-L] [Front-R]
[Front] [All]

[Time Alignment]

[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer] [Listening
Position]
[BASS Boost]
[0] to [+6]
[Rear Speaker Output]
[Rear] [Subwoofer]
[Loudness]
[Off] [Low] [Mid] [High]

Adjusting the cutoff frequency value

You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Front, Rear, Subwoofer.
Description
Adjust the speaker output level of the listening position.
1
Touch or
select the output speaker.
2
Touch or to adjust the selected speaker output
level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Rear Speaker Output].
Select a speaker unit (filter) to adjust the HPF or LPF cutoff
frequency and the slope for each speaker unit (page 36).
Select the subwoofer phase, LPF cut-off frequency and the
slope (page 36).
Select a listening position that you want to make as the
center of sound effects.
Select or customize the time alignment settings to reflect
the distance between the listener's position and each
speaker. You need to measure the distance between the
head of the listener and each speaker unit.
1
Touch or
select the alignment speaker.
2
Touch or
selected speaker and listening position.
NOTE
This function is available only when the listening position setting
is set to [Front Left] or [Front Right].
Adjust the bass boost level.
Select the rear speaker output.
NOTE
This function is available when the source is off.
Compensates for deficiencies in the low-frequency and
high-frequency ranges at low volume.
- 36 -
to select the listening position then
to select the listening position then
to input the distance between the