Advertisement
and the other side connect to the VGA port on the main board .
2) Start MStar ISP Utility, click "Config", set the parameter as follow picture:
3）点击 Read 按钮，选择要升级的 SpiFlash.bin 文件，如图所示：
3) Click read botton ,choose the file named "SpiFlash.bin" ,as follow picture.
4）打开电视机，然后再点击 Connect 按钮，出现图示小窗口提示 "Device Type is xxx"则表示连
接成功。如果小窗口提示为
钮，再点 Connect 按钮多试几次，或者重新开关机再连接直到连接成功。
注意：如果不想把串号、
Device 下面选择 File
Device
Device
File
File
Device
File Area
4)TV power on, then click the button connect If connect succeed, it will show "Device Type is
"Can't find device type"则表示连接不成功，需要点击
MAC 地址和 HDCP
MAC
MAC
MAC
Area
Area
All
All
Chip
Chip
Area，而不选 All
All Chip
Chip
KEY 擦掉，请在下图的左下角部分的
HDCP
HDCP
KEY
KEY
HDCP KEY
Dis Con 按
Erase
Erase
Erase
Erase
23 / 54
Advertisement
