Advertisement
exit factory menu：press EXIT key.
enter the secondary Menu of factory menu：use direction key to select the option that going
to enter，press"ok".
exit the secondary Menu of factory menu：press"EXIT"key go back to homepage of factory
menu.
White Balance：白平衡调节，
ADC Adjust：ADC 模数转换调节,
Non_linear ：图像、声音曲线调节
褒机
OverScan:图像重显率调节
输入：选择信号输入通道（USB 通道不可选）
Enter: choose signal channel (USB channel is
unavailable)
TEMPERATURE：选择色温模式，暖和，正常，冷艳
Choose colour temperature: warm ,standard, cold
R-GAIN,G-GAIN,B-GAIN：亮场色温调节
adjust the colour temperature of bright field
R-OFFSET,G-OFFSET,B-OFFSE：暗场色温调节
adjust the colour temperature of dark field
拷贝到其他输入：此项无需操作
Copy to other access: this option needn't operate
Inpur Source:选择输入信号的类型，choose the type of
input signal
YPBPR(HD).YPBPR(SD)
RGB
R-GAIN,G-GAIN,B-GAIN：亮场调节 (adjust bright field)
R-OFFSET,G-OFFSET,B-OFFSE：暗场调节(adjust bright
field)
AUTO ADC:自动 ADC 数模转换调节。
曲线设置:NLVolume1, NLVolume25, NLVolume50,
NLVolume75, NLVolume100,分别对应音量是 0,25%,
50%,75%,100%时的数值
Curve setting: NLVolume1, NLVolume25, NLVolume50,
NLVolume75, NLVolume100 correspond to the volume
at 0,25%,50%,75%,100%
在 OFF,White,红,绿,蓝,Black 中切换
Change between off， white，red ，green，bule。
Input Source:输入信号
Horizontal Pos 调整图象水平位置
Vertical Pos：调整图象垂直位置
Up Crop, Down Crop:调整垂直重显率
Left Crop,Right Crop :调节水平重显率
44 / 54
Advertisement
