Lascal BuggyBoard-Maxi Owner's Manual page 5

4
5
THE ARMS
A
6
4. Tightening the connectors
The connectors must be firmly attached to
the buggy such that they cannot move.
(To detach the connector. Turn anti clockwise
until the connector come loose)
5. Cut the strap.
Cut the strap as close to the connector housing
as possible. Smooth sharp edges.
Note: Leaving the strap uncut can interfere
with the locking of the cotter pin into the
connector, and therefore the safety of the
BuggyBoard™ in use.
6. Rotating the arms forward.
Turn the platform onto its wheels.
(A) Unscrew the height adjustment screws
(81310) until they are just released.
(B) Rotate the arms forward then tighten the
height adjustment screws.
B
- 4 -