Section 5 • Menu Screen Overview; Navigation Buttons - Emerson Vilter Vission 20/20 Operation And Service Manual

Section 5 • Menu Screen
Overview
The menu screen is the launching point to every other
section of the Vission 20/20 panel software. Every
screen navigated to from this screen will return to the
menu screen upon exiting, see Figure 5-1.

Navigation Buttons

Compressor Control:
• Navigates to the compressor control screen where
the operator can set the various compressor control
parameters.
Alarms and Trips:
• Navigates to the alarms and trips screen where the op-
erator can set the various alarm and trip parameters.
Timers:
• Navigates to the timer screen where the operator can
set the various time related parameters.
Vission 20/20 • Operation and Service Manual • Emerson • 35391SC 2.7
Compressor Scheduling:
• Navigates to the compressor scheduling screen
where the operator can set the scheduler to change
the control method at settable dates and times.
Compressor Sequencing:
• Navigates to the compressor sequencing screen
where the operator can set-up compressor to se-
quence up to nine other compressors. This is also
sometimes known as lead-lag control. Note, as well,
that Compressor Sequencing will only be available
when it has been enabled from Configuration Page 1,
and the selected compressor is the master.
Condenser Control:
• Navigates to the condenser control screen where
the operator can set up local condenser control
parameter.
Vilter
TM
• Not currently available.
Service Options:
• Navigates to the service options screen where the
Figure 5-1. Menu Screen
VFD:
5 – 1