Configurable Main Screen - Emerson Vilter Vission 20/20 Operation And Service Manual

Section 4 • Main Screen

Configurable Main Screen

To use the Configurable Main Screen, the "Display
Background Image" box in Configuration Page 2
(Touchscreen section) must be unchecked (default state
is Enabled). If the checkbox is enabled, only the back-
ground image of the compressor will be displayed.
The Configurable Main Screen has four tables. The top
left corner table will display values such as Anti-Recycle
Time & State for the Oil Pump, Oil Heater, SOI Solenoid,
Separator Level, Low VI, High VI & Remote Lock Out
Digital Outputs. Please see Figures 4-9,4-10,4-11,4-12.
Figure 4-9. Configurable Main Screen with Oil Pump and Oil Heater
Vission 20/20 • Operation and Service Manual • Emerson • 35391SC 2.7
The other 3 Tables are user-configured and will display val-
ues as per the settings in pages 3 & 4 of the configuration
screen. Please see Figure 4-9. No values will be displayed
in these tables if "None" is selected on the Configuration
Screen (see Figure 19-6). Please see Figure 4-13 for the
default view.
4 – 9