Length Measurement - LaserLiner DistanceMaster Compact Operating Instructions Manual

– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must only be used in accordance with its intended purpose
and within the scope of the specifications. Modifications or changes to
the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– The measuring device is equipped with a wireless interface. Local
operating restrictions, e.g. in hospitals or aircraft may apply.
Switch on, measure and switch off:
device on
1x
Change unit of measure:
m / ft / inch / _' _"
3 sec
Change measurement point (reference):
Change measurement function:
length
(device on)
1x

Length measurement:

device on
1x
DistanceMaster Compact
laser on
2x
1 sec
rear (device on)
1x
1 sec
area
1 sec
1x
laser on
2x
1 sec
measure
3x
Delete the last
measured value:
front
1x
volume
2x
measure
3x
device off
3 sec
1x
09
GB