Polygroup TGC0P3499C16 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
technology-Set up and light up your tree in less than 10 minutes!
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Eye Bolt
Fig. B - Tree and Light Assembly
Section 2
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protective cap before inserting into
the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.
7. Insert green label plug into the wall outlet.(see Fig. B), your entire tree should now be lit. If some bulbs do not light or flickers,
search for any loose plugs and/or broken, loose or missing bulbs. Connecting the plugs or replace the bad bulbs promptly in
order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom
to the top. Start with tips farthest from the pole and fan out one
to the right, one to the left and one at the center of the main
stem. (See Fig. C)
MODEL #: TGC0P3499C16
Polygroup®!
Eye Bolt
Click
Tree top
Section 4
Section 3
This tree comes with Quick Set®
1. Pull apart the legs of the stand so that they are snapped
into an x-shape, place the tree stand on a level surface.
2. When inserting the bottom section of the tree into the assembled
stand, insert and turn the eyebolts into the stand and tighten
until the tree pole is firmly secured.
To close the stand, remove the eyebolts, press the metal button
and fold the legs together.
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Insert
Green Label
Plug Into Wall
Outlet
Top view
Fig. C
1
Please scan code to
learn how to shape
and set up your tree
*Electrical Rating For The Tree
(For Indoor Use Only)
3.4A 120V 60Hz
Open the
protective
cap
Side view