Klarstein Metrobreeze New York 7K User Manual page 27

Drainage method
This product is equipped with an automatic water evaporation system. The condenser is
cooled with the circulation water to improve cooling performance and save energy.
• When the collection container is filled with
water (e.g. by using the dehumidification
mode without permanent dehumidification),
the display shows [FL] and the compressor
stops.
• Turn off the unit.
• Remove the plug from the drain and install the
supplied water hose. Place the other end of
the water hose in a bucket or drain.
• As soon as the water has drained, close the
water drain and switch on the appliance. It
should now function normally again.
EN
27