J) Displaying Barometric Pressure Value For The Past 12 Hours; K) Set Altitude, Current Weather And Unit For Barometric Pressure Hpa/Inhg; L) Weather Forecast - Renkforce 1267774 Operating Instructions Manual

j) Displaying Barometric Pressure Value for the Past 12 Hours

The weather station stores measured barometric pressure values of the last 12 hours.
To view the saved values, proceed as follows:
• Push the button „HISTORY" (D) briefly repeatedly. The lower left of the display then
shows the corresonding hours (-1 .... -12) and the associated barometric pressure.
• Wait for a few seconds without pushing any button. The current barometric pressure
is displayed again.
k) Set Altitude, Current Weather and Unit for Barometric Pressure
hPa/inHg
• Keep the button „HISTORY" (D) pushed for approx. 3 seconds to start setting mode.
• The display for the altitude of your place of residence flashes at the lower left of the
display. Set the altitude with the „+" and „-" buttons (e.g. 400 m). Keep the respective
button pressed for quick adjustment.
• Briefly push the button „HISTORY" (D). The graphic symbol for weather forecast will
flash. Select the current weather with the buttons „+" and „-".
• Briefly push the button „HISTORY" (D). The barometric pressure unit will flash. Use
the buttons „+" and „-" to choose between the unit „hPa" (hectopascal) and „inHg"
(inch mercury column).
• Briefly push the button „HISTORY" (D) to leave setting mode.

l) Weather Forecast

The weather station calculates a weather forecast for the next 12 - 24 hours from the
barometric pressure development of the last hours/days. The achievable accuracy is
at about 70%.
Note:
• If „sunny" is displayed at night, it means a starry night.
• The display does not indicate the current weather situation, but a forecast for the next
12 to 24 hours.
44