G) Trend Display; H) Moon Phase Display; I) Display Of Absolute And Relative Barometric Pressure; J) Setting The Relative Barometric Pressure - Renkforce WH2315 Operating Instructions Manual

g) Trend Display

For indoor temperature, outdoor temperature, indoor humidity, outdoor humidity, arrow symbols that indicate a trend
for in which direction the measured values are changing are displayed.
Icon Meaning
Rising
Consistent
Dropping

h) Moon phase display

The lower right of the display shows the current moon phase graphically, depending on date. The display depends on
the settings for the northern/southern hemisphere of the Earth (see chapter 10. c), setting "TIME SETTING", subfunc-
tion "NORTH/SOUTH").
New moon

i) Display of absolute and relative barometric pressure

• The basis station must be in normal mode.
• Use the " " (3) or "
so that the display range is marked with the arrow symbol "
• Briefly push the "SET" (5) button. The display will switch between the relative barometric pressure (display "REL")
and absolute barometric pressure (display "ABS").

j) Setting the Relative Barometric Pressure

The barometric pressure measured by the basis station is the actual barometric pressure (= absolute barometric
pressure) at the site of setup of the basis station. Since the barometric pressure will drop with increasing altitude, the
measured data cannot be compared to those of other weather stations on different altitudes for functional reasons.
This is what the relative barometric pressure is used for. The actually measured barometric pressure (= absolute
barometric pressure) is converted to sea level depending on altitude.
However, you cannot enter the actual altitude at the site of setup in the basis station. Instead, you can set the relative
barometric pressure for your area using the calibration (see chapter 10. c), Setting function "CALIBRATION SET-
TING"; set value "REL BARO OFFSET").
You can find the required barometric pressure value, e.g. online on various websites. Sometimes, the cur-
rent barometric pressure is also displayed on your municipality's website.
Temperature
Temperature increase
>= 1 °C within 30 minutes
Temperature increase/drop
>= 1 °C within 30 minutes
Temperature drop >= 1 °C within 30
minutes
" (4) buttons to select the display range for barometric pressure (see chapter 7. b), item 15),
Humidity
Humidity increase
>= 10% within 30 minutes
Humidity increase/drop
< 10% within 30 minutes
Humidity drop
>= 10% within 30 minutes
Full moon
".
81