Table of Contents
Advertisement
UK
Cleaning, Care & Maintenance
Unplug the appliance and allow to cool before any cleaning and maintenance.
WARNING: Do not allow any water to spill into the appliance when cleaning.
•
Use warm, soapy water and a damp cloth to clean the appliance.
•
Dry thoroughly after cleaning.
•
A BUFFALO dealer or qualified technician should carry out repairs if required.
•
Store the unit in a dry and well-ventilated place, out of the reach of children.
To avoid illness, do not reuse bags having stored raw meats, raw fish or greasy
foods. Do not reuse bags that have been microwaved or boiled.
Troubleshooting
Fault
The appliance is
The unit is not switched on
not working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Appliance does
Bag not correctly positioned
not remove all
Open end of bag is dirty
the air from the
bag
Bag may be punctured
Incorrect bags used
Bags are not
Moisture in bag under the sealing
sealing correctly
bar
Incorrect bags used
End of bag not placed above sealing
bar
Sealing Bar requires replacement
Bag is melted
Sealing time too long
NOTE: Sealing bar / Lid gasket / sealing strip replacement is not covered under warranty.
8
CT014_UK_A5_v2_20190711.indb 8
Probable Cause
Solution
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Open lid and reposition bag
Clean bag
Replace bag
Call Vacuum Pack machine supplier
Ensure inside of the bag is dry and free from
moisture where it is to be sealed
Call Vacuum Pack machine supplier
Move end of bag over sealing bar
Call BUFFALO agent or qualified technician
Reset the sealing time
2019/7/11 11:01
Advertisement
Table of Contents
