Page 1
Rhino (犀)USER MANUAL 2.5” SATA to USB EXTERNAL ENCLOSURE...
Page 2
Include Hardware Installation Guide HDD Formatting Guide Please NOTE: In order to enable HOT-SWAP function, please check to make sure the motherboard supports HOT-SWAP function. Otherwise, the hot swappable function won't be work as well. (Please refer back to motherboard user guide)
Page 3
Hardware Installation Guide Note: Please follow the instructions and make sure your HDD is successfully installed to the mobile disk. STEP1: Pull out the rear panel and tray. STEP2: Place the SATA HDD into the tray. Push the HDD to connect the SATA connector.
Page 4
HDD Formatting Guide ☆ You may format your external HDD through USB2.0 connection. ☆ Please make sure your external HDD is turned on and well connected to the PC before formatting the HDD. STEP1: Right-click “My Computer” icon and select the” Manage”...
Page 5
STEP3: Right-click on the “Unallocated” block and selects “New Partition”. STEP4: The “New Partition Wizard” will appear. Please follow the instruction of the wizard to complete.
Page 6
STEP5: When new partition is completed, the external HDD will be recognized as a “New Volume”. STEP6: Double-click “My Computer”. You will see the new volume appears on your PC.
Need help?
Do you have a question about the Rhino and is the answer not in the manual?
Questions and answers