Overview Of The Components / Delivery Scope; Unpacking The Appliance; Preparations; Notes On Use - Profi Cook PC-ICM 1140 Instruction Manual

Overview of the Components / Delivery Scope

1 Motor with display and control buttons
Button (On / Off)
Button (reduce time)
Button (increase time)
2 Lid with filler hole
3 Shaft
4 Stirring attachment
5 Locking ring
6 Container
7 Housing

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material such as plastic films, filler
material, cable ties and cardboard packaging.
3. Check the content for any missing parts.
NOTE:
There may be dust and production residue on the appli-
ance. We recommend cleaning the appliance as described
under "Cleaning".

Preparations

1. Check the bowl for any damage. Do not use the container
if leaking. Leaking cooling agent is not poisonous, but a
leaking container will affect the result of the ice cream
making process.
2. Put the bowl into the freezer for at least 8 - 12 hours The
freezer or freezer compartment should maintain a temper-
ature of at least - 18 °C.
NOTE:
• The container must be dry.
• Make sure the container stands upright. The cooling
agent inside the bowl must settle evenly.
3. Prepare an ice cream mixture. Ideal amount: approx 900 ml.
• Sugar must have dissolved completely.
• When making ice cream with fruits, only use soft,
seedless fruits that are mashed (puréed). You may
also add fruit juice.
• If you wish to add pieces of fruits, nuts, brittle or
alcohol, only add these ingredients to the finished ice
cream. Let the stirring tool stir a few more times.
NOTE:
Alcohol impairs the freezing process.
• Put the ice cream mixture into the fridge until starting
the ice cream making process. Having a temperature
of less than + 10 °C will shorten the time of the ice
cream making.
32
PC-ICM1140_IM

Notes on Use

• The appliance is switched on and off with the button .
• The appliance must be assembled completely and
switched on before filling the ice cream mixture into the
bowl. That prevents the ice cream mixture from freezing
to the inner walls of the bowl.
• Do not overfill the bowl! Ideal amount: approx. 900 ml. The
volume of the ice cream will increase during the freezing
process.
• Do not insert any objects such as fingers, spoons or simi-
lar into the filler hole while the appliance is operating.
• Preparation time varies, depending on:
− the recipe,
− the ambient temperature,
− the temperature of the ice cream mixture,
− the desired consistency.
• Do not leave the appliance unattended during operation.
Check the consistency of the ice cream permanently.
• The ice cream must not be too hard.
IMPORTANT:
Immediately turn off the appliance in case
• the stirring attachment slows down or does not turn any
more,
• hearing loud motor noise.
In these cases, proceed as described under "Using the
appliance" "End of operation".

Using the Appliance

WARNING: Risk of burning from cold!
Protect your hands for example with oven gloves when
taking the bowl from the freezer or when carrying it.
1. Remove the chilled bowl from the freezer.
2. Place the bowl into the locking ring. The latch of the
locking ring must face up.
3. Raise both together and place them into the housing. Turn
both together, so that the locking ring locks.
4. Set the motor into the lid. It must engage.
5. First, insert the shaft from below into the motor, and then
push the stirring attachment onto the shaft.
6. Set the lid with the motor onto the locking ring (see
page 3, Fig. A). The motor must engage.
7. Connection to the mains:
• Before plugging in the appliance, check if the mains
voltage matches. Refer to the rating label for the spec-
ifications of the appliance.
• Connect the appliance to a certified wall socket only.
8. Turn the appliance on with the button . The display
will show "40:00" minutes. You can set the time with the
buttons and between 5 and 45 minutes. The motor
starts running after approx. 3 seconds.
NOTE:
While running, the time no longer can be changed!
04.01.17