AlterG Anti-Gravity Treadmill Quick Start Manual

AlterG Quick Start Guide
Please consult the manual for a complete guide to using the AlterG
Press START, stand still
with arms folded, wait!
1
Press STOP
to end
5
AlterG, Inc. | 48438 Milmont Dr., Fremont, CA 94538 | 510-270-5900 | alterg.com | support@alterg.com
Once display turns on
adjust BODY WEIGHT
2
Press START and stand still with arms folded. The system will
calibrate. When the LED labeled "Ready" lights and the treadmill
display becomes active, the system is ready to use.
Pressing PAUSE will cause the treadbelt to stop and the incline will
return to 0%. Unweighting is not interrupted. Pressing PAUSE a
second time restarts the treadmill.
Press STOP to end an exercise session. The treadbelt will slow to a
stop, pressure will be released from the enclosure and the treadmill
will return to 0% incline.
Press REVERSE to walk backwards. If you are walking forward
when the button is pressed, the treadbelt will slow to a stop before
allowing backward walking.
Press DISPLAY to select a display option. Holding down the button
for more than two seconds will cause the display to cycle through
all available options.
Press DISPLAY button
to change view

System Operation

Anti-Gravity Treadmill
®
4
Adjust INCLINE
Adjust SPEED
3
140313 AGQS Rev. A
.
®